wwwaxtal.com buchfinkenweg 8 page 1(2) phone: +49 (6226) 9719689 de-74931 lobbach fax: +49 (6226) 970133 germany e-mail: info@axtal.com products specification QF3300 issue: 01 date: 2003-03-10 filter type : front end ( antenna) crystal filter parameter min. typ. max. unit condition frequency range 135 180 mhz standard frequencies khz pass bandwidth 12,5 khz @ 3 db pass band ripple 1 db @ fo 8 khz insertion / transducer attenuation 6 db shape factor sf ? db / ? db selectivity 30 khz @ 20 db 80 khz @ 60 db khz @ ? db spurious response attenuation 30 db ultimate attenuation 60 db termination input 50 // 0 ? // pf output 50 // 0 ? // pf group delay s input power nominal 0,1 mw maximum (for 10 sec) 1 mw operating temperature range 0 +60 c operable temperature range -20 +70 c storage temperature range -40 +85 c enclosure (see drawing) 61 x 26,2 x 26,2 mm terminals bnc, n or sma female option i weight gram packing bulk esd sensitivity 1500 v hbm as in iec 61000-4- 2 notes: 1. terminology and test conditions are according to iec standard iec60368-1, unless otherwise stated ordering code: model (specification) option i frequency [mhz] QF3300 bnc 144,250
wwwaxtal.com buchfinkenweg 8 page 2(2) phone: +49 (6226) 9719689 de-74931 lobbach fax: +49 (6226) 970133 germany e-mail: info@axtal.com products test iec 60068 part ... iec 61178-1 clause ... test conditions visual inspection, dimensions 4.5 4.6 enclosure styles as in iec 60368-3, if applicable sealing tests 2-17 4.8.2 gross leak: test qc, fine leak: test qk solderability resistance to soldering heat 2-20 4.8.3 test ta (235 5)c method 1 test tb method 1a, 5s shock 2-27 4.8.8 test ea, 3 x per axes 100g, 6 ms half-sine pulse bump 2-29 4.8.6 test eb, 4000 bumps per axes, 40g, 6 ms free fall 2-32 4.8.9 test ed procedure 1, 2 drops from 1m height vibration, sinusoidal 2-6 4.8.7 test fc, 30 min per axes, 10 hz - 55 hz 0,75mm; 55 hz - 2 khz, 10g rapid change of temperature 2-14 4.8.5 test na, 10 cycles at extremes of operating temperature range dry heat 2-2 4.8.11 test ba, 16 h at upper temperature indicated by climatic category damp heat, cyclic 2-30 4.8.12 test db variant 1 severity b), 55c/95% r.h., 6 cycles cold 2-1 4.8.13 test aa, 2 h at lower temperature indicated by climatic category climatic sequence 1-7 4.8.14 sequence of 4.8.11, 4.8.12 (1 st cycle), 4.8.13, 4.8.12 (5 cycles) damp heat, steady state 2-3 4.8.15 test ca, 56 days endurance tests - ageing - extended aging 4.9.1 4.9.2 30 days @ 85c 1000h, 2000h, 8000h @85c enclosure drawing pin connections terminal symbol function 1 * in input 2 * out output screw gnd ground, case * marking on request only environmental conditions
|